Self Alcohol Tester & Gas Detector (Safe-Drive)

Product Information
Produce Name: Self Alcohol Tester (Safer). Dimension: 3.5" x2.5"x0.5" Description: Personal Miniature Breathalyzer (Alcohol/Gas Detector)
1. Blood Alcohol Level Detection
5 Steps LED indication lights from Green -> Yellow ->
Orange -> Red -> flashing Red
2. Gas Leaking Test
5 Steps LED indication lights from Green -> Yellow ->
Orange -> Red -> flashing Red (Detectable Gas: LPG and CO)
3. Static Electricity Release Proximity to the car body will prompt the LED to flash, notifying removal of static electricity
4. Flash Light For maximum convenience in the dark,a torch is incorporated into the unit.
* LED Indicator and corresponding blood alcohol level(BAC)

%BAC Ratio
How To Use
  1. Press the button (A) for 2 seconds (not more than 5 seconds, if so, the product will change calibration mode). Light moves from "(1)" -> "(5)" and "(5)" -> "(1)" in regular sequence.
  2. When the light is back to green LED and is on continual that it is ready to test.
  3. Position the unit approx. 1 to 3 cm from mouth and blow into the inhaler for 3 seconds. (Intensity of blow should be mild like whistle)
  4. The LED will blink for 5 seconds according to your Blod Alcohol Concentration.
Below 0.01 (1)
0.01 ~ 0.02 (2)
0.03 ~ 0.04 (3)
0.05 ~ 1.00 (4)
Above 1.00 (5)

Notice: You are recommended to calibrate the unit to get more accurate result before using.

How to Calibrate the unit

  1. Press and hold the button (A) for more than 5 seconds. Light goes to turn on (1) -> (5), then (1) -> (5) to (5) -> (1).
  2. When the light is back to green LED (1), its calibration has been done!

For further information, please contact us!